HomeFacilitiesCapabilitiesProductsExperienceContactSearchSiteMapFeedback





Buried Object DetectionData AcquisitionGround Air CommunicationsReal Time SystemsSecurity SystemsSensorsTechnical Support Services
HSD D SENSORS (Free Field)

SPECIFICATIONS
Parameter
HSD-2 (R)
HSD-4 (R)
Aeq (m2) 1 x 10 -1 1 x 10 -2
Frequency Response (3 dB pt) >45 MHz >150 MHz
Risetime (Tr 10-90) <= 7.4 ns <= 2.3 ns
Maximum Output 5 kV 5 kV
Output Connector TCC – 100 ohm* TCC – 100 ohm*
Mass 2.15 kg 0.59 kg
Dimensions (cm)
L
 62.5 44.7
W
 28.5 8.9**
H
 20.6 6.9
t
 0.3 0.16
*100-OHM Twinaxial Connector (EG&G Data Sheet 1340)
**Connector width is greater than W on Model 4 (11.7 cm).

NOTES:
(1)  During use, this sensor must be supported by dielectric materials and positioned at least two sensor diameters from any conducting surfaces.
(2)  A DMB-3 balun (EG&G Data Sheet 1300) can be used to transform 100-ohm balanced output to 50-ohm unbalanced output for telemetry and recording.

(Data and Specifications Subject to Change without Notice)

[Home] [Facilities] [Capabilities] [Products] [Experience] [Contact] [Search] [SiteMap] [Feedback]