ASD-1
ACTIVE SIGNAL DIVIDER

The ASD Series Active Signal Divider provides up to eight isolated channels of signal division. Each channel accepts a 50-ohm input and provides four unity-gain, 50-ohm outputs, and each is fully buffered from the other outputs as well as other channels. The maximum input level is +10 dBm (0.7V RMS). The gain is unity ± 0.5 dB at 10 MHz. The bandpass flatness is ± 0.5 dB from 5 kHz to 200 Mhz and ± 1 dB to 300 MHz. The lower 3-dB point is about 1 kHz, and the upper is 400 MHz. The dynamic range at full bandwidth is in excess of 55 dB.

The ASD-1A is a 14-cm-high rack-mount chassis that provides rear panel access to all signal cables. The ASD-1B is a 17.8-cm rack-mount unit that provides front panel access to all signal lines. Performance specifications are identical for both versions.

Data Specification Sheet