HomeFacilitiesCapabilitiesProductsExperienceContactSearchSiteMapFeedback





Buried Object DetectionData AcquisitionGround Air CommunicationsReal Time SystemsSecurity SystemsSensorsTechnical Support Services
OPTICAL DATA TRANSMITTERS (ODT)

SPECIFICATIONS
 
ODT-1
ODT-6
ODT-8

Input

Single SMA

8 SMA

Single SMA

50 ohm

50 ohm

50 ohm

Single-Ended

Single-Ended

Single-Ended

Protection

500 V peak, 0.5 watt continuous

Bandpass

-3 dB points

1 kHz to 150 MHz

 

Risetime

2 to 3 ns typical

   

Dynamic Range

34 dB min; 1 dB unipolar pulse compression to tangential noise
47 dB min; peak-to-peak saturation to RMS noise (53 dB typical)

Sensitivity

150µv input with 40 dB system gain

Total Link Gain

-64 to +40 dB gain in 2 dB steps

Integration

None

None

1µs integrator

Calibration Signal

None

10 mV pulses, both polarities, 5 µs widths

Remote Control

Local or remote mode from receiver/controller

Power Requirements

<1 mA standby (0.5 mA typical)
<500 mA when on (200-350 mA typical)

Battery

“2/3 A” lithium

APS-23

APS-23

Environment

-20° to +50°C; 0 to 100% relative humidity non-condensing; 100 kV/m

Physical Size (cm)

12.2Hx9.2Wx14L
2.5 kg
15.9Hx11.5Wx14L
3.0 kg
15.9Hx11.5Wx14L
3.0kg

(Data and Specifications Subject to Change without Notice)


[Home] [Facilities] [Capabilities] [Products] [Experience] [Contact] [Search] [SiteMap] [Feedback]