|
Electrical
Characteristics
|
|
| System
Gain |
20
dB |
| Dynamic
Range @ 10 MHz |
30
dB (1-dB gain compression to tangential noise)
42 dB (peak-to-peak
signal to RMS noise) |
| Bandwidth
(3-dB points) |
1
kHz to 150 MHz |
| Bandpass
Ripple |
±1
dB from 1 kHz to 100 MHz |
| Transmitter
Input Impedance |
50
ohms unbalanced (SMA) |
| Peak
Signal Level |
Linear
Operation: 500 mV peak output
Transmitter Protection: 0.5 watt
continuous, 500 V peak |
| Risetime
(nominal) |
2.5
nanoseconds |
| Transmitter
Control |
Manual
power switch |
| Transmitter
Battery Voltage |
12.5-13.2
V nominal. Size 2.5 A h sealed lead acid batteries protected
against deep discharge. Battery pack provides 8 hours continuous
operation. |
| Receiver
Output Impedance |
50
ohms unbalanced (BNC) |
| Receiver
Power |
115
VAC, 50/60 Hz; 220 VAC, 50/60 Hz on request |
| Battery
Charger |
2-step
charger, 250 mA high charge, 7mA trickle charge; charger can
remain on battery pack indefinitely without damage |
|
Physical
Characteristics (nominal)
|
|
| Receiver |
12.5
cm H, 12 cm W, 17.5 cm L; 1.3kg |
| Transmitter |
3.8
cm H, 11.4 cm W, 14.0 cm L; 0.5 kg(without batter pack) |
| Battery
Pack (APS-23A) |
5.2
cm H, 11.4 cm W, 14.0 cm L; 1.5 kg |
| Fiber
Optics Cable |
200-m
long, 100-micron-core, graded index fiber |
Click here for